The Edexcel BTEC Higher National Certificate (HNC) in Electrical and Electronic Engineering is a specialist vocational programme, linked to professional body requirements and with a strong work related emphasis. The HNC provides a thorough grounding in the key concepts and practical skills required in the electrical and electronic engineering sector and its wide recognition by employers allows progression directly into employment. This programme aims to develop a good understanding of the key areas of electrical and electronic engineering, preparing students for a wide range of careers and further study.
The emphasis is also placed on transferable skills, e.g. project management and business management techniques, to ensure that graduates have the awareness to succeed in the ever changing technological and management context. A range of assessment methods is used including coursework, time constrained assignments, projects, reports and presentations.
you are under 21 years of age at the start of the course, you must have at least one
of the following:
- At least one GCE A-level
pass. In addition, you should have appropriate supporting passes at GCSE
(including English and Maths at grade C or above) or Key Skills Level 2
qualifications in communication, IT and Application of Number or
- A Level 3 qualification
such as: BTEC level 3 Diploma, National
Diploma, Advanced GNVQ/NVQ, AVCE/VCE, Foundation Certificate in a relevant subject
- Access to Higher Education in a relevant subject
- Advanced Modern
Apprenticeship with Level 3 qualifications in a relevant subject
- An equivalent foreign
- Any other level 3
qualification in a relevant subject
If you are over 21 years of age, you may demonstrate a more
varied profile of achievement that is likely to include relevant work
experience and/or achievement of a range of professional qualifications in their
Graduates can progress to a wide range of careers in electrical and electronic engineering, e.g. electrical/electronic design, communication design, manufacture, maintenance and technical services areas of the engineering industry. Graduates can also progress onto further study on the BTEC HND in Electrical and Electronic Engineering or a relevant Bachelor degree.
Edexcel BTEC Higher National Certificate (HNC) and Higher National Diploma (HND) qualifications are internationally recognised by employers and professional organisations. The recognition is a way for students to prepare for jobs and careers in the engineering sector through membership of relevant professional bodies. HNC and HND students and graduates may be offered exemptions by various professional bodies from parts of their own qualifications in relation to membership.
The Edexcel BTEC Higher Nationals in Electrical and Electronic Engineering have been developed with career progression and recognition by professional bodies in mind. The development of this qualification has been informed by discussions/relevant publications from the Engineering Council UK (EC (UK)) and the Science, Engineering and Manufacturing Technologies Alliance (SEMTA).
To qualify for the Edexcel BTEC Higher National Certificate in Electrical and Electronic Engineering students must complete at least 120 credits. A minimum of 65 credits must be at level 4.
|UNIT CODE||UNIT NAME||UNIT LEVEL||UNIT CREDIT|
|HNEE 101||Analytical Methods for Engineers - 4||4||15|
|HNEE 102||Engineering Science - 4||4||15|
|HNEE 103||Project Design, Implementation and Evaluation - 5||5||20|
|HNEE 105||Electrical and Electronic Principles - 5||5||15|
|HNEE 106||Health, Safety and Risk Assessment for Engineering - 4||4||15|
|HNEE 115||Electronic Computer-Aided Design - 4||4||15|
|HNEE 158||Microprocessor Systems - 4||1||15|
|HNEE 163||Electrical Power - 4||4||15|
Tuition fees for Part-Time Programmes - 2013/2014
|Higher National Certificate
|Higher National Diploma
|Higher National Certificate
|Higher National Diploma
|Postgraduate Standard Diploma
|Top up degree programmes
|Top up degree programmes
- The above tuition fees do not include textbooks, study
materials or accommodation fees.
- 5% discount is offered to self-paying students who
settle the annual tuition fees in full before the start of
the course. This discount applies only when the annual fee
- Administrative charges of £100.00 or £150.00 apply to
payments by installments (please refer to payment policy
- Additional fees per module apply to re-assessments and
- A graduation fee of £200.00 will be charged to all
students attending the Graduation Ceremony.Students who do
not wish to attend their Graduation Ceremony will be
£200 graduation certification fee, depending
on the award and additional services requested (eg
apostille, international postage, notary public
certification, etc). These charges are due on the final
year of study.
To be classified as a home
student for the purpose of tuition fee payment:
The three year residence rule also applies to you if you have:
- you must be a British or EU national
- you must have resided in the European Union for three
years prior to the start of your course
- an indefinite leave to remain in the UK visa
- a spouse/partner/dependent visa
- any other visa which permits you to remain and work in
the UK without any restrictions
Note: Before you apply, please make sure you have access to your email, prepared document scans (picture, passport, other supporting documents)
Please click here to proceed with Online Application (opens in new window)
Analytical Methods for Engineers - 4 [HNEE 101]
This unit enables learners to develop previous mathematical knowledge obtained at school or
college and use fundamental algebra, trigonometry, calculus, statistics and probability for the
analysis, modelling and solution of realistic engineering problems.
Learning outcome 1 looks at algebraic methods, including polynomial division, exponential,
trigonometric and hyperbolic functions, arithmetic and geometric progressions in an engineering
context and expressing variables as power series.
The second learning outcome will develop learners’ understanding of sinusoidal functions in an
engineering concept such as AC waveforms, together with the use of trigonometric identities.
The calculus is introduced in learning outcome 3, both differentiation and integration with rules
and various applications.
Finally, learning outcome 4 should extend learners’ knowledge of statistics and probability by
looking at tabular and graphical representation of data; measures of mean, median, mode and
standard deviation; the use of linear regression in engineering situations, probability and the
Engineering Science - 4 [HNEE 102]
Engineers, no matter from what discipline, need to acquire a fundamental understanding of the
mechanical and electrical principles that underpin the design and operation of a large range of
engineering equipment and systems.
This unit will develop learners’ understanding of the key mechanical and electrical concepts that
relate to all aspects of engineering.
In particular, learners will study elements of engineering statics including the analysis of beams,
columns and shafts. They will then be introduced to elements of engineering dynamics, including
the behavioural analysis of mechanical systems subject to uniform acceleration, the effects of
energy transfer in systems and to natural and forced oscillatory motion.
The electrical system principles in learning outcome 3 begin by refreshing learners’
understanding of resistors connected in series/parallel and then developing the use of Ohm’s law
and Kirchhoff’s law to solve problems involving at least two power sources. Circuit theorems are
also considered for resistive networks only together with a study of the characteristics of growth
and decay of current/voltage in series C-R and L-R circuits.
The final learning outcome develops learners’ understanding of the characteristics of various AC
circuits and finishes by considering an important application – the transformer.
Project Design, Implementation and Evaluation - 5 [HNEE 103]
This unit provides opportunities for learners to develop skills in decision making, problem solving
and communication, integrated with the skills and knowledge developed in many of the other
units within the programme to complete a realistic project.
It requires learners to select, plan, implement and evaluate a project and finally present the
outcomes, in terms of the process and the product of the project. It also allows learners to
develop the ability to work individually and/or with others, within a defined timescale and given
constraints, to produce an acceptable and viable solution to an agreed brief.
If this is a group project, each member of the team must be clear about their responsibilities at
the start of the project and supervisors must ensure that everyone is accountable for each aspect
of the work and makes a contribution to the end result.
Learners must work under the supervision of programme tutors or work-based managers.
Electrical and Electronic Principles - 5 [HNEE 105]
Circuits and their characteristics are fundamental to any study of electrical and electronic
engineering and therefore a good understanding is important to any engineer.
The engineer must be able to take complex electrical circuit problems, break them down into
acceptable elements and apply techniques to solve or analyse the characteristics. Additionally,
fine tuning of the circuits can be performed to obtain required output dynamics.
This unit draws together a logical appreciation of the topic and offers a structured approach to
the development of the broad learning required at this level. Learners will begin by investigating
circuit theory and the related theorems to develop solutions to electrical networks.
In learning outcome 2 the concept of an attenuator is introduced by considering a symmetrical
two-port network and its characteristics. The design and testing of both T and π networks is also
Learning outcome 3 considers the properties of complex waveforms and Fourier analysis is used
to evaluate the Fourier coefficients of a complex periodic waveform.
Finally, learning outcome 4 introduces the use of Laplace transforms as a means of solving first
order differential equations used to model RL and RC networks, together with the evaluation of
circuit responses to a step input in practical situations.
Health, Safety and Risk Assessment for Engineering - 4 [HNEE 106]
This unit has been designed to develop the learner’s awareness of the principles, planning and
implementation of health and safety practice within an industrial environment such as those to
be found in engineering production, manufacture, services and maintenance and those in the
chemical, transport and telecommunication engineering industries.
In particular, the selection, application and evaluation of safe working procedures, for operations
appropriate to particular industrial activities, are first considered. Then current UK and EU health
and safety legislation, the role of the inspectorate, safety audits and current codes of practice are
covered. Next, risk is assessed and evaluated by identifying, rating and assessing the severity of
hazards and recording all evidence and actions taken for future monitoring of these hazards.
Finally, risk management activities are considered including the methods used for gathering
evidence, disseminating information, complying with current regulations and implementing policy
to minimise risk to life and property, for activities within a general engineering environment.
Electronic Computer-Aided Design - 4 [HNEE 115]
This unit will develop learners understanding of the applications of Electronic Computer-Aided Design and will enable them to apply ECAD to design problems.
This unit investigates a range of Electronic Computer-Aided Design (ECAD) packages and their implications on the design process. It allows learners to evaluate ECAD tools and to appreciate how they influence the commercial aviability of products. It is intended to give an insight into modern design tools and provide an opportunity for learners to develop operational skills using industry-standard software.
Microprocessor Systems - 4 [HNEE 158]
This unit will develop learnersâ€™ understanding of microprocessor-based systems and their use in instrumentation, control or communication systems.
This unit will develop learners understanding of the practical aspects of device selection and the interfacing of external peripheral devices. Learners will also study the key stages of the
development cycle â€“ specify, design, build, program, test and evaluate.
The first learning outcome requires learners to investigate and compare the applications of
microprocessor-based systems. Following this, learners will experience and develop software
designs and write programs for a microprocessor-based system. The final learning outcome
considers the design of programmable interface devices such as UARTs, PPIs, I/O mapped
devices and memory-mapped devices. At this point, learners should be able to carry out the
design, build, program and test of a programmable interface. This will include the selection and use of devices and the writing and testing of suitable software in assembler or high-level
Electrical Power - 4 [HNEE 163]
Our modern world increasingly relies upon electrical power to supply our industries, commercial
centres and homes with a convenient, flexible and reliable source of energy.
To meet the client’s expectations, electrical energy must be provided at a reasonable cost and
transmitted to the point of need, at the appropriate voltage and current levels. The client’s
utilisation of the energy source needs to be appropriate, without undue complexity, to facilitate
energy generation and transmission.
This unit takes the learner through the complex process of analysing three-phase systems with
consideration being given to harmonics and their effects. The methods of power distribution
through the National Grid are then discussed with final economic considerations taken into
account to enhance generation, transmission and distribution, with acceptable costs to clients.
Throughout their working careers, modern engineers will have to consider new technologies and
be able to evaluate the options available to make appropriate selections. With our global
resources of fossil energy reserves decreasing and concerns over protecting the environment
growing, alternative sources of energy are considered. Evaluative considerations will be made to
inform the engineer of the issues associated with this topic, which may need to be considered far
more at local and regional levels. Additionally, self-generation of electrical energy is now possible
for a broad range of users throughout the world, utilising local environmental facilities.